Auto Tray Switch Feature; Order For Selecting The Paper Trays - Oce CS191 Phase 3 User Manual

Copy paper/originals

Auto tray switch feature

If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional LCT is installed, a maximum of 3,400 copies (with A4 v paper) can
be made continuously. (The paper tray is automatically switched only if the
"Auto Tray Switch ON/OFF" parameter in the Utility mode is set to "Allow".)
Operating Conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- Paper trays that are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to "System setting" on
page 13-27.

Order for selecting the paper trays

As a factory default, when a different paper tray is automatically selected, the
next paper tray in the following list is chosen.
tray 2 % tray 3 % tray 4 % tray 1
!
Detail
To change the order in which the paper trays are selected, refer to
"System setting" on page 13-27.
CS191 (Phase3)
8
8-9