Oce CS191 Phase 3 User Manual page 97

Before making copies
No. Part name
26 ADF connector
27 Filter 1
28 Power connector
29 Power connector for the external
controller
30 Dehumidifier heater power switch
31 Filter 2
32 TEL PORT2 jack
33 LINE PORT2 jack
34 TEL PORT1 jack
35 LINE PORT1 jack
36 External controller port
37 IEEE1284 port (type C)
38 USB port (type B)
USB 2.0/1.1-compliant
39 Internal controller port
40 Network connector
(10 Base-T/100 Base -TX)
41 Left-side cover
42 Finisher connector
43 Ozone filter
CS191 (Phase3)
Description
Used for connecting the ADF hookup cord
Collects the toner dust generated in the machine
Used for connecting the power cord
Used for connecting the power cord for the external
controller
Used to turn the dehumidifier heater on and off.
Turning on the dehumidifier heater reduces mois-
ture in the paper. This switch is used when the op-
tional dehumidifier heater is installed.
Collects the toner dust generated in the machine
Used for connecting the cord from the telephone
Used for connecting the general subscriber line
Used when the optional fax multi line mount kit is in-
stalled
Used for connecting the cord from the telephone
Used for connecting the general subscriber line
Used for connecting the cable from the external
controller
Used for connecting the parallel cable from the
computer
Used for connecting a USB cable from the compu-
ter
Used for connecting the internal controller
Used for connecting the network cable when this
machine is used for network printing and network
scanning
Opened when clearing paper misfeeds in the ADF
Used for connecting the finisher hookup cord
Collects the ozone generated in the machine
3
3-11