Oce CS191 Phase 3 User Manual page 208

4
– If the binding position for the copy is set to "Auto", the binding
position is automatically determined according to the orientation of
the loaded original. If the original length is 297 mm or less, a binding
position along the long side of the paper is selected. If the original
length is more than 297 mm, a binding position along the short side
of the paper is selected.
– If the binding position for the copy is set to "Auto", the binding
position is set at the top or at the left.
3
Touch [Binding Direction].
– For a single-sided original, select the binding position for the copy,
and then touch [OK].
– For a double-sided original, select the binding positions for the
original and the copy, and then touch [OK].
4-64
Basic copy operations
CS191 (Phase3)