Table of Contents
Advertisement
4
Stapling copies (Staple settings)
!
Detail
In order for the copies to be stapled, all of the following conditions must
be met.
- The paper width must be between 182 mm and 297 mm.
- The paper length must be between 148.5 mm and 431.8 mm.
If the "Mixed Original" setting is selected, all copies must have the same
paper width.
If a Staple setting is selected, the "Sort" setting is automatically selected.
A Staple setting cannot be used together with the "Offset" setting.
If a Staple setting is to be selected, select the orientation in which the
original is positioned and the orientation of the page to be stapled,
otherwise the copies may not be stapled as desired.
For details on specifying the original orientation, refer to "Selecting the
original orientation (Original Direction settings)" on page 4-28.
Copies can be fed out stapled either in the corner or at two places.
Tray
Finishing tray 1
Finishing tray 2
Optional finishing tray
Number of Bound Pages
Examples of the possible number of bound pages are listed below.
- 50 sheets of 90 g/m
- 2 sheets of 209 g/m
- Maximum of 30 sheets of 91 to 150 g/m
Reminder
Copies can be fed out stapled either in the corner or at two places only
when the finisher is installed.
4-90
Paper Weight
Paper Size
2
2
50 g/m
to 90 g/m
A3 w to A5 v
2
2
91 g/m
to 120 g/m
2
2
50 g/m
to 90 g/m
A3 w to A5 v
2
2
91 g/m
to 120 g/m
2
2
50 g/m
to 90 g/m
A3 w to A5 v
2
2
91 g/m
to 120 g/m
2
paper
2
paper + 48 sheets of 90 g/m
Basic copy operations
Loading Capacity
32 mm
A4 w or less: 132 mm
B4 w or more: 64.5 mm
24 mm
2
paper
2
paper
CS191 (Phase3)
Advertisement
Table of Contents
Troubleshooting
