Oce CS191 Phase 3 User Manual page 470

9
What happens when "Auto" is specified?
?
% The factory default setting is "Auto". Touch [Auto] to automatically
determine the binding position according to the orientation of the
loaded original. If the original length is 297 mm or less, a binding
position along the long side of the paper is selected. If the original
length is more than 297 mm, a binding position along the short side
of the paper is selected.
4
Using the keypad, specify the margin width.
– If "None" is selected, the margin width is set to 0 mm. When making
double-sided copies, the image orientation can adjusted without
creating a filing margin.
What happens when a value outside of the allowable range is
?
specified?
% The message "Input Error" appears. If "Input Error" appears or if the
filing margin was incorrectly entered, press the [C] (clear) key in the
keypad, and then specify the correct value.
? How can the entered margin position be corrected?
% Without changing the margin width, change the margin position.
5
Touch [OK].
6
If necessary, specify any other copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
9-72
Application functions
CS191 (Phase3)