Oce CS191 Phase 3 User Manual page 381

Copy paper/originals
4
Touch [Custom Size].
The Custom Size screen appears.
5
Type in the length (X) and width (Y) of the paper.
– Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 457.2 mm)
– Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (90.0 mm to 311.1 mm)
– If a value outside of the allowable range is specified, the message
"Input Error" appears. Type in a value within the allowable range.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
CS191 (Phase3)
8
8-15