To Set The "Enlarge Display Timer Setting" Function - Oce CS191 Phase 3 User Manual

Additional copy operations

To set the "Enlarge Display Timer Setting" function

When the automatic panel reset operation is performed, a message
requesting confirmation to cancel Enlarge Display mode can be displayed.
In addition, it is possible to specify the length of time that the message
requesting confirmation to cancel Enlarge Display mode is displayed.
The factory default setting is "OFF".
1
Display the Accessibility Setting screen. (To display the screen, refer to
page 5-26)
2
Touch [Enlarge Display Timer Setting] or press the [2] key in the
keypad.
CS191 (Phase3)
5
5-29