Oce CS191 Phase 3 User Manual page 138

3
4
Load the paper into the left side of
the LCT so that the side of the paper
to be printed on (the side facing up
when the package was unwrapped)
faces up.
– Load letterhead paper so that the side to be printed on faces down.
5
Close the LCT.
Reminder
Be careful not to touch the film.
Do not load so many sheets of paper that the top of the stack is higher
than the , mark.
For details on the paper that can be loaded into the LCT, refer to "Copy
paper/originals" on page 8-3.
Note
If the machine has entered Low Power mode or Sleep mode, the LCT
cannot be pulled out, even after the tray release button is pressed. Be
sure to first cancel Low Power mode or Sleep mode.
3-52
Before making copies
, mark
CS191 (Phase3)