Oce CS191 Phase 3 User Manual page 426

9
7
Select the desired copy settings, and then press the [Start] key.
– To print a single copy to be checked, touch [Proof Copy] key.
– Repeat steps 6 and 7 until all original batches have been scanned.
The amount of memory available can be checked beside "Memory"
in the upper-right corner of the screen. In addition, the number of
original batches can be checked beside "Number of Sep. Scans".
– If not enough space is available in the memory, a message appears.
Select whether to delete the last part of the data and scan it again,
delete the last part of the data and print, or delete all of the original
data.
– To cancel changes to the settings, touch [Cancel Change].
Scanning begins. After scanning is finished, select [Fix], and then touch
[OK].
Is there more information about the settings?
?
% Refer to the appropriate section.
8
After all original pages have been scanned, touch [Finish].
A message appears, requesting confirmation that scanning is finished.
9-28
Application functions
CS191 (Phase3)