Adjusting The Horizontal Punch Position - Oce CS191 Phase 3 User Manual

Utility

Adjusting the horizontal punch position

The horizontal position of punched holes when printing with a Punch setting
can be adjusted for each paper type.
0 Before making any adjustments, use a Punch setting to print a sample
copy. Perform the adjustment while checking the sample that was
created.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting screen" on page 13-61.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [3 Finisher Adjustment].
The Finisher Adjustment screen appears.
5
Touch [3 Punch Horizontal Position].
The Punch Horizontal Position screen appears.
6
Touch the button for the paper type to be adjusted.
CS191 (Phase3)
13
13-79