Oce CS191 Phase 3 User Manual page 622

13
3
Type in the administrator password, and then touch [OK].
For details on typing in text, refer to "Entering text" on page 14-3.
The Administrator Setting screen appears.
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, touch [Close] in each
screen until the desired screen appears.
Reminder
The default administrator password is "12345678". The administrator of
this machine should change the administrator password.
Be sure to keep the administrator password in a safe place. If the
administrator password is lost, it must be specified by the technical
representative. For details, contact the technical representative.
13-62
Utility
CS191 (Phase3)