Oce CS191 Phase 3 User Manual page 389

Copy paper/originals
7
Specify the X and Y sides of the paper, and then touch [OK].
– Touch either [X] or [Y], press the [C] (clear) key to clear the current
setting, and then use the keypad to type in the size.
– To specify a paper size of 12e18 w, touch [12e18 w]. Values for "X"
and "Y" are entered.
– If a value outside the allowable range is specified, the message
"Input Error" appears. Type a value within the allowable range. The
allowable range differs depending on the paper sizes.
– If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.
8
Touch [OK], and then touch [OK] in the next two screens that appear.
The Basic screen appears again.
Note
The selected size button is programmed with the entered paper size, so
that the paper size is available to be selected again without having to be
typed in. In addition, the size can be changed.
CS191 (Phase3)
8
8-23