To Select Single-Sided Copies - Oce CS191 Phase 3 User Manual

Basic copy operations

To select single-sided copies

0 The default setting is "1
0 For details on using the original glass to scan multiple original pages,
refer to "Scanning a multi-page original from the original glass" on
page 4-18.
1
In the Basic screen, touch [Simplex/Duplex].
The Simplex/Duplex screen appears.
2
Touch [1
– If "2
direction, otherwise the copies will not be printed as desired.
– If the binding position for the original is set to "Auto", the position
of the binding margin is automatically selected. A binding margin
along the long side of the paper is selected if the original length is
297 mm or less. If the original length is more than 297 mm, a
binding margin along the short side of the paper is selected.
– If the binding position for the original is set to "Auto", the binding
margin is set at the top or at the left.
CS191 (Phase3)
1".
1] or [2 1].
1" is selected, specify the binding direction and the original
4
4-61