4
–
If the "2 Color" setting was selected, touch the button for the
desired color, and then touch [OK].
One of the colors for the "2 Color" setting is black, which cannot be
changed. In this step, touch the button for the second color.
–
If the "Single Color" setting was selected, touch the button for the
desired color, and then touch [OK].
–
Touch [
desired, touch [Solid].
–
To use the average brightness method for reproducing gradations
in monocolor originals, touch [Solid].
–
If the "Solid" setting is not selected, the relative luminosity method
is selected.
3
Touch [OK].
The Basic screen appears again.
4-42
Back] or [Fwd.
], and then select the desired color. If
Basic copy operations
CS191 (Phase3)