Electrostatic Charger Wire - Oce CS191 Phase 3 User Manual

11

Electrostatic charger wire

If the electrostatic charger wire is dirty, streaks will appear though the printed
images. If this occurs, follow the procedure described below to clean the
electrostatic charger wire.
1
Open the machine's front door.
2
Slowly pull out the charger-cleaning
tool as far as possible. Next, slowly
push in the charger-cleaning tool as
much as possible. Repeat the above
operations three times.
3
Securely insert each charger-cleaning tool, and then close the front
door.
11-6
Care of the machine
CS191 (Phase3)