Selecting A Stored Zoom Ratio - Oce CS191 Phase 3 User Manual

Basic copy operations

Selecting a stored zoom ratio

Copy zoom ratios that have been stored can be recalled to be used when
desired. In addition, stored copy zoom ratios can be changed.
0 The default setting is "e1.0".
0 Touch [+] to enlarge the zoom ratio, and touch [–] to reduce the zoom
ratio in e 0.001 increments.
0 Stored zoom ratios can be changed to desired zoom ratios. For details
on storing zoom ratios, refer to "Storing the desired zoom ratio" on
page 4-58.
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
2
Touch the button for the desired zoom ratio under "Set Zoom".
3
Touch [OK].
The Basic screen appears again.
CS191 (Phase3)
4
4-57