Table of Contents
Advertisement
Before making copies
Automatically turning the machine on/off (weekly timer)
The machine can be set to automatically enter Sleep mode according to a
usage schedule determined by the administrator or limitations on the use of
the machine can be specified.
This is the weekly timer.
Follow the procedure described below to use the machine while the weekly
timer is being used.
1
Press the [Power Save] key.
–
For details on setting the weekly
timer, refer to "System setting"
on page 13-39.
2
Type in the password (up to 8 digits) for non-business hours.
–
For details on specifying the password for non-business hours,
refer to "System setting" on page 13-39.
3
Touch [OK].
The message "Access restricted due to weekly timer. Input amount of
time prior to entering Sleep Mode." appears on the touch panel.
CS191 (Phase3)
3
3-35
Advertisement
Table of Contents
Troubleshooting
