Application functions
4
Using the keypad, type in the starting number.
–
The starting number can be set between 0 and 9999.
–
The distribution number is normally printed as a four-digit number.
If "Start Number" is set to "1", "0001" is printed.
–
To print the stamp only on the front cover page, touch [Cover Only].
–
The stamp will not be printed on blank pages inserted using the
"Cover Mode", "Insert Sheet" and "Chapters" functions.
–
To cancel changes to the settings, touch [Cancel].
–
To cancel the "Set Numbering" function, touch [OFF].
5
Touch a button under "Text Color" and under "Pages" to specify the
desired settings.
–
Pages printed with the "Black" Color setting and "Red" or "Blue"
selected under "Text Color" are counted as 2-color prints.
–
If the color of the stamp text is different from the second color
selected when "Color" was set to "2 Color", copies are included in
the Full Color counter.
6
Touch [OK].
7
If necessary, specify any other copy settings.
8
Using the keypad, type in the desired number of copies.
9
Press the [Start] key.
CS191 (Phase3)
9
9-89