Oce CS191 Phase 3 User Manual page 337

Troubleshooting
4
Raise lever FN1, turn dial FN2, and
then pull out any paper.
5
Lower guide FN3, and then pull out
any paper.
– If the punch kit is installed, pull
out the hole-punch waste
container FN3.1.
6
Return guide FN3 to its original position.
– If the punch kit is installed, insert the hole-punch waste container
FN3.1 into its original position.
7
Turn dial FN4 to feed the paper, open
the transport unit cover, and then
pull out any paper.
CS191 (Phase3)
FN3.1
6
6-47