Oce CS191 Phase 3 User Manual page 156

4
3
Align the original with the
the back-left corner of the original
scales.
– For details on selecting the
original orientation, refer to
"Selecting the original orientation
(Original Direction settings)" on
page 4-28.
– For details on selecting the
position of the binding margin,
refer "Selecting the position of the binding margin (Margin
settings)" on page 4-32.
– For transparent or translucent
originals, place a blank sheet of
paper of the same size as the
original over the original.
– For bound originals spread over
two facing pages, such as a book
or magazine, position the top of
the original toward the back of
this machine and align the
original with the
back-left corner of the original
scales, as shown.
4
Close the original cover, or the ADF if it is installed.
4-12
mark in
Blank sheet
of paper
mark in the
Basic copy operations
Original scales
CS191 (Phase3)