Adjusting The Starting Print Position For The Second Side - Oce CS191 Phase 3 User Manual

13

Adjusting the starting print position for the second side

The starting print position at the left edge of the paper for the second side
during automatic double-sided copying for each paper tray can be adjusted.
0 The starting print position is adjusted during manufacturing of the
machine. Normally, this position will not need to be adjusted.
0 Only A4 v paper can be used to adjust the bypass tray.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting screen" on page 13-61.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [3 Centering (Duplex 2nd Side)].
The Centering (Duplex 2nd Side) screen appears.
6
Touch the button for the paper tray to be set.
7
Press the [Start] key.
A test pattern is printed.
13-68
Utility
CS191 (Phase3)