Default Function Permission; To Specify The Default Function Permissions - Oce CS191 Phase 3 User Manual

Utility

Default function permission

If external server authentication was selected, limitations can be placed on
the machine functions that can be used by an authorized user. (The default
setting is "Allow".)
The following operations can be limited.
- Copy operations
- Scan operations
- Fax operations
- Printing operations
- Saving originals on the hard disk
- Printing transmission functions

To specify the default function permissions

1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the Administrator Setting screen" on page 13-61.
2
Touch [4 User Authentication/Account Track].
The User Authentication/Account Track screen appears.
3
Touch [2 User Authentication Setting].
The User Authentication Setting screen appears.
Can [2 User Authentication Setting] be selected?
?
% [2 User Authentication Setting] is not available if "User
Authentication" on the Authentication Method screen is set to
"OFF".
4
Touch [1 Administrative Setting].
5
Touch [Default Function Permission].
The Default Function Permission screen appears.
CS191 (Phase3)
13
13-101