Interrupting A Copy Job (Interrupt Mode); To Interrupt A Copy Job - Oce CS191 Phase 3 User Manual

5
5.3

Interrupting a copy job (Interrupt mode)

The current jobs can be temporarily interrupted so an original can be copied
with different copy settings.
This is convenient for quickly making a copy.
!
Detail
For details on making a copy after printing of the current job is finished,
refer to "To increase priority for printing" on page 12-20.

To interrupt a copy job

1
Position the original to be copied. (For details, refer to page 4-9.)
2
Press the [Interrupt] key.
– If a job is being printed, the
message "Job is stopping."
appears.
The indicator on the [Interrupt] key
lights up in green and printing of the
current job stops.
? What settings are selected when the [Interrupt] key is pressed?
% When the [Interrupt] key is pressed, all functions and settings are
reset to their defaults.
? Why is the [Interrupt] key not available?
% The [Interrupt] key cannot be pressed while an original is being
scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
5
After the interrupting job is finished printing, press the [Interrupt] key.
The indicator on the [Interrupt] key goes off, and Interrupt mode is
canceled.
The settings return to those specified before printing was interrupted.
5-10
Additional copy operations
CS191 (Phase3)