Oce CS191 Phase 3 User Manual page 484

9
– To make fine adjustments to the printing position, touch [Change
Adjustment]. Select the desired direction under "Left & Right
Adjustment" or "Top & Bottom Adjustment", use the keypad or
touch [–] and [+] to specify the adjustment setting, and then touch
[OK].
– To also specify settings for Application functions "Cover Mode",
"Insert Sheet" and "Chapters", touch [Insert Sheet Setting], and
then select the settings for the pages to be printed.
– Blank pages inserted using the "Cover Mode", "Insert Sheet" and
"Chapters" functions are only counted, but page numbers are not
printed on them.
– If "Except for Front Cover" or "Do Not Print Page #" is selected
under "Cover Mode", page numbers are printed starting with "2" in
single-sided copies and starting with "3" in double-sided copies.
– If "Do Not Print Page #" is selected, inserted pages are only
counted, but page numbers are not printed on them. If "Skip the
page(s)" is selected, inserted pages are not counted and page
numbers are not printed on them.
9-86
Application functions
CS191 (Phase3)