Basic copy operations
–
The buttons that appear in the Change Setting screen differ
depending on the specified settings. Settings for the following can
be changed.
Simplex/Duplex, Bind, Zoom, Frame Erase, Center Erase, Original
Size
–
The amount of memory available can be checked beside "Memory"
in the upper-right corner of the Basic screen.
–
To delete the image data, press the [Stop] key, and then delete the
job. For details, refer to "Stopping scanning/printing" on
page 4-102.
5
After all original pages have been scanned, touch [Finish].
CS191 (Phase3)
4
4-15