Oce CS191 Phase 3 User Manual page 483

Application functions
4
Using the keypad, type in the starting page number.
– If necessary, touch [Chapter], and then use the keypad to type in
the chapter number.
– The setting for "Page #" can be set to a number between –99999
and 99999, and the setting for "Chapter" can be set to a number
between –100 and 100. When specifying a starting number, switch
the number between positive and negative by pressing the [ ] key.
If a negative value is specified, the numbers are not printed until the
numbering reaches 1. For example, if "–1" was specified, the
numbers are printed starting with "1" on the third copied page.
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Page #" function, touch [OFF].
5
Specify the page number format.
6
Touch [Print Position], and then select the printing position.
CS191 (Phase3)
9
9-85