Daylight Saving Time Setting - Oce CS191 Phase 3 User Manual

13
Output Setting
Parameter
Print/Fax Output Set-
tings
Output Tray Setting
Bin Setting
Reminder
The "Output Tray Setting" parameter is available only if optional Output
Tray is installed.
Date/Time Setting
Description
Specify the current date and time. In addition, the time zone can be
set between -12:00 and 13:00 (in 30-minute increments).

Daylight Saving Time Setting

Description
Select whether or not the machine's internal clock observes daylight
saving time.
If "ON" is selected, a setting appears so that the length of time for
adjusting the current time can be set. The daylight saving time can
be set between 1 and 150 minutes in 1-minute increments.
13-40
Description
Specify settings for faxing and printing. For details, refer to the[ Fac-
simile Operations] and [Print Operations] of the user manual.
Select the finishing tray for each type of
job (copies, printouts, faxes and re-
ports).
The output tray 1 can be specified as
mailbin 5 and the optional output tray
can be specified as mailbin 6.
Utility
Default Setting
Copy: Tray 1
Print: Tray 1
Report Output: Tray 2
Fax (Main Line): Tray 2
Fax (2nd Line): Tray 2
Disable
Default Setting
Time Zone: +00:00
Default Setting
OFF
CS191 (Phase3)