Oce CS191 Phase 3 User Manual page 518

Replacing toner cartridges and staples and emptying waste containers
10
9
Raise the finishing tray, and then
push down the staple cartridge
holder and remove it.
10
Swing open the shutter of the staple
cartridge holder, and then pull out
one sheet of staples.
11
Return the shutter of the staple cartridge holder to its original position.
12
Insert the staple cartridge holder,
and then push it down until it locks
into place.
13
Return the finishing tray to its original position.
14
Close the front door.
10-22 CS191 (Phase3)