Oce CS191 Phase 3 User Manual page 646

13
– If the lines are shifted in the X direction as shown below, touch [+]
under "X" to increase the adjustment (between 1 dot and 6 dots).
– If the lines are shifted in the Y direction as shown below, touch [–]
under "Y" to reduce the adjustment (between –1 dot and –6 dots).
– If the lines are shifted in the Y direction as shown below, touch [+]
under "Y" to increase the adjustment (between 1 dot and 6 dots).
13-86
Utility
CS191 (Phase3)