Operation Precautions; Power Source; Operating Environment; Storage Of Copies - Oce CS191 Phase 3 User Manual

2
2.9

Operation precautions

To ensure the optimum performance of this machine, observe the
precautions described below.

Power source

The power source requirements are as follows.
- Voltage fluctuation: Maximum ± 10% (at 220 to 240 V AC)
- Frequency fluctuation: Maximum ± 3 Hz (at 50 Hz)
– Use a power source with as little voltage or frequency fluctuations as
possible.

Operating environment

The environmental requirements for correct operation of the machine are as
follows.
- Temperature: 10°C (50°F) to 30°C (86°F) with fluctuations of no more than
10°C (18°F) within an hour
- Humidity: 15% to 85% with fluctuations of no more than 10% within an
hour

Storage of copies

To store copies, follow the recommendation listed below.
- Copies that are to be kept for a long time should be kept where they are
not exposed to light in order to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner
on copies.
- Color copies have a thicker layer of toner than normal black-and-white
copies. Therefore, when a color copy is folded, the toner at the fold may
peel off.
2-24
Installation and operation precautions
CS191 (Phase3)