6
Reminder
If the paper is misfed as described below, contact your technical
representative.
The paper is wrapped around the roller in the fusing unit.
The paper is folded or shredded by the roller in the fusing unit.
The paper that was removed tore and partly remains in the fusing unit.
Decreased copy quality may result if
the surface of the image transfer belt or
the transfer roller is touched. Be careful
not to touch the surface of the image
transfer belt or the transfer roller.
!
Detail
For details on the positions of paper
misfeeds, refer to "Paper misfeed
indications" on page 6-8.
6-24
Troubleshooting
Image transfer belt
Transfer roller
CS191 (Phase3)