8
8.2
Selecting the paper settings
This section describes the procedures for specifying the size and type of
paper loaded in each paper tray.
!
Detail
For details on loading the paper into the tray 1, refer to "Loading paper
into the tray 1" on page 3-45.
For details on loading the paper into the bypass tray, refer to "Loading
paper into the bypass tray" on page 3-53.
To automatically detect the paper size ("Auto Paper Select" setting)
The size of the paper loaded tray 1 and the bypass tray can be detected
automatically.
The following procedure describes how to specify the setting for
automatically detecting the paper loaded into the tray 1.
1
In the Basic screen, touch [Paper].
The Paper screen appears.
8-10
Copy paper/originals
CS191 (Phase3)