Utility
–
To scroll through the values quickly, touch [+] or [–] continuously.
8
Touch [OK].
–
To cancel changes to the settings, touch [Cancel].
The fold position is adjusted.
If the folding position was at the center of the paper in step 7, this
completes the procedure.
9
Use the "Fold & Staple" function to print a another sample copy.
10
Check the print result.
–
Check that the folding position is adjusted to the center of the
paper.
–
If more adjustment is necessary, repeat steps 1 and 9.
Note
If the angle of the center folding position must be adjusted, contact your
technical representative.
CS191 (Phase3)
13
13-75