13
7
Type in the account name (up to 8 characters), and then touch [OK].
–
For details on typing in text, refer to "Entering text" on page 14-3.
–
If [Name] was displayed, type in the account name (up to 20
characters), and then touch [OK].
–
If "Account Name & Password" was selected, the same account
name cannot be used more than once.
The account name is set.
8
Touch [Password].
–
If "Account Track Input Method" was set to "Password Only", the
same password cannot be registered more than once.
The Password screen appears.
9
Type in the password (up to 8 characters), and then touch [OK].
A screen for retyping the password appears.
10
Retype the password specified in step 9, and then touch [OK].
The account password is set.
11
Touch [Output Permission].
The Output Permission screen appears.
13-116
Utility
CS191 (Phase3)