Oce CS191 Phase 3 User Manual page 115

Before making copies
8
Specify new copy settings and the desired number of copies, and then
press the [Start] key.
– After the machine has finished warming up, the jobs will
automatically be printed in the order that they were queued.
To stop the job being printed
?
% Press the [Stop] key. For details, refer to "Stopping
scanning/printing" on page 4-102.
!
Detail
While the machine is warming up to begin printing after it is turned on
using the sub power switch, copy settings can be specified and an
original can be scanned to reserve a copy job. After the machine has
finished warming up, the copies are automatically printed.
The print order can be changed or jobs can be deleted from the Current
Jobs list of the Job List screen. For details, refer to "Managing jobs (Job
List)" on page 12-3.
CS191 (Phase3)
3
3-29