Interrupting A Copy Job (Interrupt Mode); To Interrupt A Copy Job - Oce cm4520 User Manual

4
4.3

Interrupting a Copy Job (Interrupt Mode)

The current jobs can be temporarily interrupted so a document can be cop-
ied with different copy settings.
This is convenient for quickly making a copy.
!
Detail
For details on making a copy after printing of the current job is finished,
refer to "To increase priority for printing" on page 11-17.

To interrupt a copy job

1
Position the document to be copied. (For details, refer to page 3-8.)
2
Press the [Interrupt] key.
– If a job is being print-
ed, the message
"Job is stopping."
appears.
The indicator on the [In-
terrupt] key lights up in
green and printing of the
current job stops.
What settings are se-
?
lected when the [In-
terrupt] key is
pressed?
% When the [Interrupt] key is pressed, all functions and settings are
reset to their defaults.
Why is the [Interrupt] key not available?
?
% The [Interrupt] key cannot be pressed while a document is being
scanned.
3
Select the desired copy settings.
4
Press the [Start] key.
Printing begins for the job that the previous job was interrupted for.
4-8
Additional Copy Operations
Interrupt
cm4520