Interrupt a copy job
Introduction
The Interrupt mode allows you to start another job, while a job with many sets
is processed. The procedure to interrupt a job is as follows.
The Interrupt key
■
The current copy job stops, after the printing of the current set is complete.
■
The previously digitised information and the job settings are stored in the
machine memory.
One or more copy, print or scan jobs can be started.
■
The Interrupt key
■
The suspended copy job continues.
■
The Key operator can disable the Interrupt mode.
Note:
If a copy charge system or an external finisher is connected to the Océ
Note:
VarioPrint 2050-70, the Interrupt mode is not available.
Before you begin
You can only enter the Interrupt mode when the Océ VarioPrint 2050-70
■
processes a job. The message box informs you when the Océ VarioPrint
2050-70 accepts the Interrupt mode request.
How to interrupt a copy job
Press the Interrupt key
1
[37] Press the Interrupt key
[37] Press the Interrupt key
62
Océ VarioPrint 2050-70 Job manual
is pressed, to enter the Interrupt mode.
is pressed, to quit the Interrupt mode.
while a copy job is processing.