Interrupt A Copy Job - Oce VarioPrint 2045-65 DC Job Manual

Interrupt a copy job

Introduction
The Interrupt mode allows you to start another job, while a job with many sets
is processed. The procedure for interruptting a job is as follows:
The interrupt key
■
The current copy job stops, after the printing of the current set is complete.
■
The previously digitised information and the job settings are stored in the
machine memory.
One or more jobs can be started.
■
The interrupt key
■
The suspended copy job continues.
■
The Key Operator can disable the interrupt mode.
Note:
If a Copy control device or an external finisher is connected to the Océ
Note:
VarioPrint 2045-65 DC, the Interrupt mode is not available.
Before you begin
You can only enter the interrupt mode when the Océ VarioPrint 2045-65 DC
■
processes a job. The message box informs you when the Océ VarioPrint
2045-65 DC accepts the interrupt mode request.
How to interrupt a copy job
Press the Interrupt key
1
[43] Press the interrupt key
[43] Press the interrupt key
The copy function
is pressed to enter the interrupt mode.
is pressed to exit the interrupt mode.
while a copy job is processing.
61