Using copy functions
2
Using copy functions
2.1
General copy operation
Note
For details on the copy operation, refer to the User's Guide [Copy Operations].
This section contains information on the general operation for making copies.
1
Press the [Copy] key in the control panel, and then press the [Enlarge
Display] key.
The Copy mode screen appears in Enlarge Display mode.
2
Position the original to be copied.
– For details on positioning the original, refer to
page 1-11
3
Specify the desired copy settings.
– For details on specifying original settings, refer to
– For details on selecting the Paper settings, refer to
– For details on selecting the Zoom setting, refer to
– For details on selecting the original and copy settings, refer to
– For details on selecting a Combine setting, refer to
– For details on selecting Finishing settings, refer to
– For details on specifying settings to not rotate the image, refer to
page
2-20.
– For details on selecting the original image quality, refer to
VarioLink 5022/VarioLink 4222/VarioLink 3622
.
"Feeding the original" on
page
1-13.
page
2-4.
page
2-7.
page
page
2-12.
page
2-14.
page
2-21.
2
2-9.
2-2