General Copy Operation - Oce VarioLink 2222c User Manual

3.1

General copy operation

3 How to use Copy mode
This section describes the basic copy operations in the enlarge display mode.
d
Reference
For details on the copy operation, refer to the [User's Guide Copy Operations].
3.1 General copy operation
The following describes the general operation for making copies.
1
Press the Copy key, and then the Enlarge Display key on the Control Panel.
The enlarged display screen for Copy mode appears.
2
Load the original.
For details, refer to page 2-14.
3
Configure the desired copy settings.
% For details on the Basic tab, refer to page 3-4.
% For details on the Original/Density tab, refer to page 3-13.
4
Using the Keypad, enter the desired number of copies.
% If the number of copies was incorrectly entered, press the C
(clear) key in the keypad, and then enter the correct number of
copies.
VL3622c/VL2822c/VL2222c
3
3-2