NEC Univerge SV8100 Features And Specifications Manual page 532

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-42 Service Code Setup (for Service
Access) – Flash on Trunk lines
11-12-59 Service Code Setup (for Service
Access) – Trunk Drop Operation
for SLT
14-02-03 Analog Trunk Data Setup – Flash
Type
14-02-04 Analog Trunk Data Setup –
Hooking Type
15-02-05 Multiline Telephone Basic Data
Setup – Transfer Key Operation
Mode
15-03-04 Single Line Telephone Basic
Data Setup – Flashing
15-07-01 Programmable Function Keys
2 - 504
Description/Comments
Customize the flash on trunk lines
Service Codes.
Customize the trunk drop
operation for single line telephone
Service Codes.
Select the flash type.
Use Flash for Timed Flash
(Program 81-01-14) or Disconnect
(Program 81-01-15). (A user can
press the FLASH key while on a
trunk call to implement Flash.)
If the Conf key should access
Flash, enter 2. Otherwise, enter 0
or 1.
Enable/Disable Flash for single
line (500/2500 type) telephones.
Assign a function key for Drop Key
(code 84) if required.
UNIVERGE SV8100
Assigned Data
1
SLT
#
(default = 3)
SLT

(default not assigned)
0 = Open Loop Flash
1 = Ground
Always set this option

for Open Loop Flash
(0)
(default = 0)
0 = Timed Flash
(Hooking)
1 = Disconnect (Cut)
(default = 0)
0 = Transfer
1 = Call back
2 = Hook
(default = 0)
0 = No
1 = Yes
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Level
2 3




Drop Key