NEC Univerge SV8100 Features And Specifications Manual page 863

UNIVERGE SV8100
Related Features
K-CCIS – IP
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Refer to the UNIVERGE SV8100 Networking Manual for programming details.
Program
Program Name
Number
10-26-04 IP System Operation Setup –
DT700 Peer to Peer Mode
50-15-04 CCIS over IP Basic Information
Setting – Connection Method for
Terminal
84-21-21 CCIS over IP CODEC Information
Basic Setup – DTMF Relay Mode
K-CCIS – IP
Description/Comments
Use to Enable (1) or Disable (0)
the Peer to Peer feature for SIP
MLT and SIP IP stations.
Choose the connection method for
the DT700.
When connecting to a SV8300 or
SV8500 this must be set to 2
(H.245).
Assigned Data
1
0 = Off
1 = On
(default = 1)
0 = Peer-to-Peer
disable
1 = Peer-to-Peer
enable
(default = 1)
0 = Disable
2 = Inbound(RFC2833
3 = Outbound(H.245)
(default = 0)
Issue 8.01
Level
2 3



2 - 835