NEC Univerge SV8100 Features And Specifications Manual page 235

UNIVERGE SV8100
To Call Monitor after calling a busy extension:
1. Call a busy extension.
2. Press the Barge-In key (Program 15-07 or SC 751: 34).
- OR -
The following steps are not available for DISA or Tie Line trunks.
1. Dial the extension number of the busy internal party.
2. Dial the single digit service code or the service code 710 (the access code will change).
To Call Monitor without first calling the busy extension:
1. Press Speaker or lift handset.
2. Dial 710 or press the Barge-In key (Program 15-07 or SC 751: 34) (the access code will change).
3. Dial a busy extension.
If Monitoring is not possible:

the extension user hears a warning tone.

the DISA user is rerouted to the defined ring group.

the Tie Line user hears a busy tone.

To Call Monitor using Coaching Ability:
1. Call a busy extension.
2. Press the Barge-In key (Program 15-07 or SC 751:34).
3. Press MIC or Feature + 1 to toggle Coaching Ability on and off to the monitored station.
- OR -
1. Dial the extension number of the busy party.
2. Dial the single digit service code or the service code 710 (the access code changes).
3. Press MIC or Feature + 1 to toggle Coaching Ability on and off.
To Call Monitor using Coaching Ability without first calling the busy extension
1. Press Speaker or lift the handset.
2. Dial 710 or press the Barge-In key (Program 15-07 or SC 751:34). The access code changes.
3. Dial a busy extension.
4. Press MIC or Feature + 1 to toggle Coaching Ability on and off to the monitored station.
Call Monitoring
Issue 8.01
2 - 207