NEC Univerge SV8100 Features And Specifications Manual page 471

UNIVERGE SV8100
Program
Program Name
Number
22-07-01 DIL Assignment
22-08-01 DIL/IRG No Answer Destination
Operation
To answer a call on your Direct Inward Line:
1. Lift the handset.
2. Press the flashing line key for DIL on the multiline terminal.
Press the flashing Answer Key to put the first call on hold and answer the second incoming call. This

can be repeated until all incoming calls are answered.
If you have Ringing Line Preference, lift the handset to answer the call.

If you do not answer the call, it may ring other extensions (i.e., the DIL No Answer Ring Group).

To place a call on your Direct Inward Line:
1. Lift the handset.
2. At the multiline terminal, press the line key for DIL.
- OR -
Dial 9 and the DIL trunk number (e.g., 005).
#
- OR -
Dial 704 and the DIL trunk group number (e.g., 05).
- OR -
Dial 9 for Trunk Group Access.
3. Dial the number.
Direct Inward Line (DIL)
Description/Comments
Set the destination extension
number for each DIL – for each
Night Service mode. The
destination can be an extension
port, virtual extension number, or
Department Group pilot number
(as assigned in Program
11-07-01).
For each DIL with delayed ringing,
enter the DIL No Answer Ring
Group. An unanswered DIL rings
this group after the DIL No Answer
Time. Make an entry for each
Night Service mode.
Assigned Data
1
Extension Number
(maximum eight digits)
(default not assigned)

0 (No Setting)
001~100
(Incoming Ring Group)
102 (In-Skin/
External Voice Mail
or VM8000 InMail)
(default = 1)
Issue 8.01
Level
2 3

2 - 443