NEC Univerge SV8100 Features And Specifications Manual page 708

Issue 8.01
Program
Program Name
Number
14-07-01 Trunk Access Map Setup
15-02-06 Multiline Telephone Basic Data
Setup – Hold Key Operating
Mode
15-02-07 Multiline Telephone Basic Data
Setup – Automatic Hold for CO
Lines
15-02-11 Multiline Telephone Basic Data
Setup – Callback Automatic
Answer
15-06-01 Trunk Access Map for
Extensions
2 - 680
Description/Comments
Set up the Trunk Access Maps.
This sets the access options for
trunks.
Set the function of the Multiline
Hold key.
When talking on a CO call, and
another line key is pressed, the
original trunk is placed on Hold or
disconnected.
Enable/Disable Callback
Automatic Answer.
Assign Trunk Access Maps to
extensions.
UNIVERGE SV8100
Assigned Data
1
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and
Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold).
0 = Normal (Common)
1 = Exclusive Hold
(default = 0)
0 = Hold
1 = Disconnect (Cut)
(default = 1)
0 = Disable
1 = Enable
(default = 1)
Trunks 1~200
(default = 1)
Level
2 3





Hold