NEC Univerge SV8100 Features And Specifications Manual page 682

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-13-26 Class of Service Options
(Supplementary Service) –
Group Listen
Operation
To initiate Group Listen:
1. Place or answer call using the handset.
2. Press Speaker twice (but do not hang up).
Speaker flashes slowly.

You can talk to the caller through your handset. Your co-workers hear your caller's voice over your telephone

speaker after pressing Speaker twice. Press Speaker a third time to turn off Group Listening.
To talk Handsfree after initiating Group Listen:
1. Hang up the handset.
2 - 654
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Group Listen.
UNIVERGE SV8100
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
Group Listen
Level
2 3

