Table 2-54 Caller Id Sent To Mobile Telephone - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Automatic Conversation Record for trunks

Caller ID Presented to the Mobile Extension
Direct Internal Call – CPN of the Calling Phone is presented to the Mobile Extension (Version

3000 or higher software required).
Direct Trunk Call with CID – Caller ID of incoming call is presented to the Mobile Extension

(Version 3000 or higher software required).
Direct Trunk Call without CID – CPN of Mobile Extension is presented to the Mobile Extension.

Transferred Trunk Call with CID –

Transferred before inter-digit timeout – Caller ID of incoming call is presented to the Mobile Extension

(Version 3000 or higher software required).
Transferred after inter-digit timeout – CPN of the Transferring Phone is presented to the Mobile

Extension (Version 3000 or higher software required).
Transferred Trunk Call without CID –

Transferred before inter-digit timeout – CPN of Mobile Extension is presented to the Mobile Extension.

Transferred after inter-digit timeout – CPN of the Transferring Phone's CPN is presented to the Mobile

Extension (Version 3000 or higher software required).
Only when the outbound trunks are ISDN or SIP trunks.

ISDN will need to accept the inbound Caller ID as the Calling Party Number (CPN) presentation for

the outbound call.
Mobile Extension

Table 2-54 Caller ID Sent to Mobile Telephone

Inbound Trunk
Analog CID CFA Analog
Analog CID CFA ISDN PRI/SIP
ISDN PRI CFA ISDN PRI/SIP
ISDN PRI CFA Analog
Analog CID CFNA Analog
Analog CID CFNA ISDN PRI/SIP
ISDN PRI CFNA ISDN PRI/SIP
ISDN PRI CFNA Analog
for Type of Call

Outbound Trunk
Issue 8.01
Y/N
N
Y
Y
N
N
Y
Y
N


2 - 965