NEC Univerge SV8100 Features And Specifications Manual page 352

Issue 8.01
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-10-17 Service Code Setup (for System
Administration) – Dial Block by
Supervisor
11-11-33 Service Code Setup (for Setup/
Entry Operation) – Dial Block
20-06-01 Class of Service for Extensions
20-08-08 Class of Service Options
(Outgoing Call Service) – Toll
Restriction Dial Block
21-09-01 Dial Block Setup – Toll
Restriction Class with Dial Block
21-09-02 Dial Block Setup – Supervisor
Password
2 - 324
Description/Comments
Assign a service code used by the
supervisor to set Dial Block for
another extension.
Assign a service code to use for
Dial Block.
Assign a Class of Service (1~15)
to extensions.
Turn Off or On an extension user
ability to use Dial Block.
Assign a Code Restriction COS
(1~15) when the Dial Block feature
is used.
Assign a 4-digit password used by
the supervisor to enable or disable
Dial Block for other extensions.
UNIVERGE SV8100
Assigned Data
1
MLT
(default = 601)
MLT, SLT
(default = 600)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:

Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On

(default = 0 for
COS 1~15)
1~15

(default = 15)
0~9, , #

(4-digit fixed)
(default not assigned)
Code Restriction, Dial Block
Level
2 3

