NEC Univerge SV8100 Features And Specifications Manual page 925

UNIVERGE SV8100
Program
Program Name
Number
20-06-01 Class of Service for Extensions
20-10-06 Class of Service Options
(Answer Service) – Meet-Me
Conference and Paging
31-02-01 Internal Paging Group
Assignment – Internal Paging
Group Number
31-02-02 Internal Paging Group
Assignment – Internal All Call
Paging Receiving
 For additional programming information on Paging, refer to the
Operation
Meet Me External Page
To make a Meet Me External Page:
1. At multiline terminal, press Speaker or pick up the handset.
- OR -
At the single line telephone, lift the handset.
Meet Me Paging
Description/Comments
Assign a Class of Service (1~15)
to an extension.
Turn Off or On an extension user
ability to use Meet-Me Conference
and Paging.
Assign extensions to Internal
Paging Groups (i.e., Page Zones).
Allow/Deny All Call Internal Paging
for each extension. If allowed,
extension can place and receive
All Call Internal Paging
announcements. If denied,
extensions can make, but not
receive, All Call Internal Paging
announcements. If combined,
Paging zones should be restricted
as well, change the internal page
zone group in Program 31-07-01
to 0.
Paging, External
Assigned Data
1
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 1 for
COS 1~15)
0~64
(0 = No Setting)
Default:
0 for IP Station
1 for TDM Station
0 = Deny
1 = Allow
(default = 0)
and Paging, Internal features.
Issue 8.01
Level
2 3




2 - 897