NEC Univerge SV8100 Features And Specifications Manual page 792

Issue 8.01
For a list of vendors that have successfully completed interoperability certification go
to http://www.necntac.com
Conditions
A maximum of 128 IP Trunks are supported in the SV8100.

SIP trunks are assigned in increments of four.

Calling Party Name is not provided for outgoing calls on SIP trunks.

With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board

installed, half duplex connections are not supported. For troubleshooting purposes, a
managed switch capable of port mirroring is required to capture packet data from the
SV8100 IPLB Ethernet port.
Default Setting
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
None
Related Features
None
2 - 764
and refer to Technical Documentation.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100